Champion 0504952 Dishwasher Fill Solenoid Valve 3/8" FPT IN/OUT 120V

Regulates incoming water flow during the fill cycle through electrically controlled valve operation. The Champion 0504952 Dishwasher Fill Solenoid Valve operates on 120V, 50/60Hz with a 10W coil and features 3/8" FPT inlet and outlet connections. The valve opens or closes the water supply when energized by the control system and functions as part of the water fill system.

Equipment Compatibility:
Designed for use with compatible Champion commercial dishwashers where controlled water filling is required. This Valve is used in Champion TUW, U-BW, UH-100, UH-100B, UH-150, UH-150B, UH-170, UH-170B, UL-100, UL-150, and UTL models, where it regulates incoming water flow for proper wash cycle operation.

Product Specifications:
SKU: 0504952
Manufacturer: Champion
Product Type: Dishwasher Fill Solenoid Valve
Inlet Connection: 3/8" FPT
Outlet Connection: 3/8" FPT
Voltage: 120V
Frequency: 50/60 Hz
Power: 10W

Key Features:

• Regulates incoming water flow during dishwasher fill cycles.
• Features 3/8" FPT inlet and outlet connections.
• Operates on 120V, 50/60Hz power with a 10W coil.
• Opens and closes the water supply in response to the control system.

Step1: Turn off power and shut off the water supply to the dishwasher.

Step2: Remove the access panel to locate the existing fill solenoid valve.

Step3: Disconnect water lines and wiring from the old valve.

Step4: Install the new valve, reconnecting water lines and electrical connections securely.

Step5: Reattach the access panel, restore water supply, and turn on power.

Step6: Run a short cycle to check for proper filling and leaks.

Step7: Handle water connections carefully and avoid electrical contact.

• What maintenance is required for the Champion 0504952 Fill Solenoid Valve?

  Check for leaks and clean any mineral buildup around the valve. Inspect wiring connections and test operation to ensure consistent water flow and efficient dishwasher filling cycles.

• What are common issues with the Champion 0504952 Fill Solenoid Valve?

  • Water flow inconsistency or weak fill.
  • Coil not filling correctly.
  • Leakage from inlet/outlet fittings.
  • Internal debris-reducing valve efficiency.
  • Slow response causing delayed fill cycles.