Bakers Pride 2065874 Oven Ignitor 29" Lead 2-1/8" X 7/16" 24V

Ignition Operation:
Receives a electrical signal and converts it into a high-voltage spark at the ignition point. The spark ignites the gas-air mixture supplied to the burner, allowing combustion to begin when the equipment calls for heat. Proper electrical continuity, positioning, and spacing help maintain reliable ignition performance during normal operation.

Spark Transfer:
Transfers the generated ignition spark across the required gap to the burner ignition point, where it initiates combustion of the gas-air mixture. Consistent spark transfer depends on proper electrical continuity, correct ignitor positioning, and maintaining the intended ignition gap. A stable spark helps support reliable burner startup and reduces interruptions during repeated heating cycles.

Replacement Guidelines:
Replace the Ignitor if it is damaged, cracked, worn, or no longer provides reliable ignition. The part number 2065874 and 24V electrical specification should be verified before replacement to ensure the correct ignitor is selected. Replace the ignitor if deterioration affects ignition response, electrical connection, spark operation, or normal equipment operation.

Common Failure Symptoms:

• Ignitor failing to produce the expected ignition response.
• Ignition becoming intermittent or unreliable.
• Delayed ignition during normal equipment operation.
• Ignitor showing visible cracks, damage, or deterioration.
• Electrical connection becoming unreliable.
• Ignitor failing to respond consistently to the 24V supply.
• Burner ignition failing to occur as expected.

Equipment Compatibility:
The Bakers Pride 2065874 Convection Oven Ignitor 24V is designed for compatible Bakers Pride commercial cooking equipment requiring this ignition component and electrical specification. Verify the equipment model, part number, voltage rating, and ignition system configuration before purchasing.

Technical Specifications:
Brand: Bakers Pride
Part Number: 2065874
Component Name: Ignitor
Electrical Specification: 24V
Appliance Type: Convection Oven

Step1: Turn off the power and gas to the appliance before starting.

Step2: Remove the oven access panel to reach the ignitor.

Step3: Disconnect the wiring from the old ignitor carefully.

Step4: Unscrew and remove the old ignitor from its mounting.

Step5: Install the new ignitor in the same position and secure it with screws.

Step6: Reconnect all wiring exactly as removed.

Step7: Restore power and gas and test for proper ignition.

Step8: Follow safety precautions to avoid electric shock or burns.

• What maintenance is required for the Bakers Pride 2065874 Ignitor?

  Keep the ignitor clean and free of grease or carbon buildup to ensure accurate ignition. Inspect wiring connections for wear or looseness. Avoid touching the element directly. Always disconnect power before servicing to prevent electrical shock or accidental ignition.

• What are the common issues with the Bakers Pride 2065874 Ignitor?

  • Failure to spark or ignite gas consistently.
  • Weak or intermittent ignition performance.
  • Cracked or damaged ignitor element.
  • Loose or faulty electrical connections are disrupting the operation.

• What is the Bakers Pride 2065874 convection oven ignitor used for?

  The Bakers Pride 2065874 ignitor provides the ignition source needed to start the burner heating process in a compatible convection oven.

• Where is the Bakers Pride 2065874 ignitor used in a convection oven?

  The ignitor is used within the oven's ignition system as part of the burner-starting arrangement during the heating cycle.

• Why is the Bakers Pride 2065874 identified as a convection oven ignitor?

  This designation identifies the component as an ignition part intended for the burner system of a compatible convection oven.

• What should buyers check before purchasing the Bakers Pride 2065874 ignitor?

  Buyers should verify the convection oven model, ignition-system arrangement, and existing ignitor information to confirm the part matches their equipment.

• What signs indicate that the Bakers Pride 2065874 ignitor may need replacement?

  Failure to ignite, intermittent ignition, or visible damage to the ignitor may indicate that the component needs replacement.

• Ghost Kitchens: Commercial Restaurant Food Delivery Simplified Oct 02, 2024
• Revolutionizing Revenue: 19 Innovative Ways to Boost Restaurant Sales May 30, 2024