Henny Penny 30094 Fryer Compression Fitting

SKU: 30094 1-30094 Brand:
Henny Penny
Availability:
In Stock
(0)
$2.02
Have a Question? +1 (866) 863-0907

Specifications:

  • Brass Male Connector, 1/8" Mpt X 1/4" Cct Nut & Ferrule.
  • Blodget
  • Henny Penny Fryer 580, 680
  • Middleby Marshall
  • Vulcan

Description

The Henny Penny 30094 Fryer Compression Fitting is used to join parts by squeezing the pipes and tubes to ensure the liquid or gas does not leak out. Installation is by sliding the fitting over the pipe and compressing it in place to effect a connection that is under pressure. It is intended to be used in commercial kitchen fryers, and is normally installed within the plumbing system of the fryer, to either connect water, oil or gas lines, so that the system may be correctly plumbed. The compact fitting is easily accommodated to the existing setups.

Dimensions:

  • Weight: 0.04 lbs
  • Length: 0.6 in
  • Height: 1.2 in
  • Width: 0.6 in

This Part Fits the Following Models

94 models
Henny Penny CFE-410 Henny Penny CFE-420 Henny Penny Computron 7000 Henny Penny OE-301 Henny Penny OE-302 Henny Penny OE-303 Henny Penny OE-30X Henny Penny OG-301 Henny Penny PFE-500 Henny Penny PFE-561 Henny Penny PFG-500 Henny Penny PFG-561 Blodgett DFG-100 XCEL Blodgett HV-100G Blodgett HVH-100E Blodgett HVH-100G Blodgett MARK V XCEL SERIES Blodgett MARK V-100 XCEL Blodgett MT3240G Blodgett MT3255G Blodgett MT3270E Blodgett MT3855G Blodgett MT3870 Blodgett XCEL-50EC CROWN STEAM 30P-STGL CROWN STEAM 30P-STGM CROWN STEAM 40P-STGL CROWN STEAM 40P-STGM CROWN STEAM BLG-30G CROWN STEAM BLG-40G CROWN STEAM ETP-10G CROWN STEAM ETP-5G CROWN STEAM GS-30 CROWN STEAM GS-40 CROWN STEAM MPS-3E CROWN STEAM PS-3E CROWN STEAM PS-6E CROWN STEAM SC-10E CROWN STEAM SC-10G CROWN STEAM SC-7E CROWN STEAM SC-7G CROWN STEAM SN-3E CROWN STEAM SN-4E CROWN STEAM SN-5E CROWN STEAM SN-5G CROWN STEAM ST-5G CROWN STEAM SX-3 CROWN STEAM SX-5 CROWN STEAM SX-5G3 Keating 2000 Series Gas Pasta Cooker Keating Instant Recovery Pre-2000 Series Keating TS14 Market Forge 30P-STGL Market Forge 30P-STGM Market Forge 40P-STGL Market Forge 40P-STGM Market Forge ETP-10G Market Forge ETP-5G Market Forge MPS-3E Market Forge PS-3E Market Forge PS-6E Market Forge ST-5G Nieco 750BYB Nieco N1535 Nieco N550G Nieco N750 Roundup - AJ Antunes DFW-100 Roundup - AJ Antunes DFW-150 Roundup - AJ Antunes DFW-200 Roundup - AJ Antunes DFW-250 Roundup - AJ Antunes DFWT-100 Roundup - AJ Antunes DFWT-150 Roundup - AJ Antunes DFWT-200 Roundup - AJ Antunes DFWT-250 Roundup - AJ Antunes MPS-250 Roundup - AJ Antunes MS-250 Roundup - AJ Antunes MS-255 Roundup - AJ Antunes TBS-1X Roundup - AJ Antunes TBS-2X Vulcan Hart 924A Vulcan Hart 936A Vulcan Hart 948A Vulcan Hart 960A Vulcan Hart 972A Vulcan Hart V24 Vulcan Hart V260 Vulcan Hart V36 Vulcan Hart V36F Vulcan Hart V60 Vulcan Hart V60F Vulcan Hart VSX10GC Vulcan Hart VSX5G Vulcan Hart VSX5GC Vulcan Hart VSX7GC
Showing of 94.0

BLODGETT:

M0959

CROWN STEAM:

9768-3

GARLAND:

G7280 GLG7280

HOBART:

FP-078-49

KEATING:

4142 KEA4142

MARKET FORGE:

98-6123 986123

MIDDLEBY MARSHALL:

M0959

NIECO:

5662

ROUNDUP:

2040103

VULCAN HART:

FP-078-49

Step1: Shut off power/gas and allow system to cool.

Step2: Remove existing connector and inspect threads/fitting.

Step3: Apply food-grade thread sealant to male threads.

Step4: Thread new connector by hand into port to avoid cross-threading.

Step5: Tighten with proper tool to secure, avoid overtightening.

Step6: Reconnect line, restore supply, and check for leaks using the solution.

  • What maintenance is required for the Henny Penny 30094 Male Connector?

    Inspect the male connector regularly for corrosion, wear, or loose fittings. Clean contacts with a dry, non-abrasive cloth to ensure proper conductivity. Tighten connections securely and replace if damage is detected to maintain better, accurate operation.

  • What are common issues with the Henny Penny 30094 Male Connector?

    • Loose or unstable connections causing intermittent operation.
    • Corrosion or oxidation on contact surfaces.
    • Cracked or worn connector housing.
    • Electrical conductivity loss from damaged terminals.
    • Overheating due to improper connection fit.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More