Hobart FP-085-68 Adapter 7/16 Tube X 3/8 MPT, EL

Special Price $23.83 Regular Price $30.94
In stock
SKU
FP-085-68
Plumbing Parts, Adapters,
Manufacturer:
The Hobart FP-085-68 Adapter 7/16 Tube x 3/8 MPT EL 90-degree connector that connects a tube to a male threaded port, and inverts the line. Elbows are used to provide a sealed passage of gas or fluid between tubing and threaded parts in the service or fuel system of an appliance when fitted. It is applied in commercial kitchen equipment where line sizes are required to be integrated at an angle. The screwed into the threaded fitting and holds the tube end in place by connecting with other parts to make the connection complete.

Dimensions

  • Length: 1.5 In
  • Width: 0.5 In
  • Height: 1.5 In
  • Weight: 0.184 lbs
https://partsfe.com/media/catalog/product/h/o/hobart-fp-085-68-adapter-7-16-tube-x-3-8-mpt-el-95659-2.jpg

Product Notes

  • Brass Male 90 Degree Elbow,
  • 7/16" Cct X 3/8" Mpt Nut & Ferrule.
GARLAND:
VULCAN HART:
Write Your Own Review
You're reviewing:Hobart FP-085-68 Adapter 7/16 Tube X 3/8 MPT, EL
Your Rating
Customer Questions
What maintenance is required for the Hobart FP-085-68 Adapter?

Inspect the adapter regularly for leaks, corrosion, thread wear, or loose fittings. Clean the connection points to prevent debris buildup that may affect sealing performance. Tighten fittings carefully during routine equipment checks and replace damaged seals if needed. Always disconnect equipment pressure or power before servicing connections.

What are common issues with the Hobart FP-085-68 Adapter?

  • Leakage around threaded connections
  • Cracked or damaged tube fittings
  • Corrosion affecting sealing surfaces
  • Loose installation causing pressure loss
  • Cross-threading during assembly
  • Restricted flow from internal blockage

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More

Installation Steps

Step1: Turn off equipment power and shut off any connected gas or fluid supply before starting.

Step2: Remove the existing adapter or fitting and clean the connection points.

Step3: Position the new adapter, aligning the tube end and male pipe thread correctly.

Step4: Tighten the nut and ferrule securely without over-torquing to avoid damaging brass fittings.

Step5: Restore system power and pressure, then check all joints for leaks or loose connections.