Pitco B6700604-CL Fryer Temperature Probe W/ 16" Wire Leads & Stuffing Box

Temperature Sensing:
Detects changes in cooking oil temperature and converts those changes into electrical feedback for the fryer control system. As oil temperature increases or decreases, the probe provides corresponding temperature information. Continuous sensing allows the control system to monitor the cooking temperature throughout the heating cycle.

Heating Control Support:
Works with the fryer control system to provide temperature feedback during heating operation. The control system uses the probe's temperature information to determine when heating adjustments are required. Consistent temperature feedback supports stable operation and helps maintain the selected cooking temperature.

Replacement Guidelines:
Replace the Fryer Temperature Probe Service Kit if the probe is damaged, produces inaccurate temperature readings, responds inconsistently, or no longer provides reliable temperature feedback. The part number B6700604-CL and temperature probe service kit configuration should be verified before replacement to ensure the correct kit is selected. Replace the service kit if deterioration affects temperature sensing, signal response, temperature regulation, or normal equipment operation.

Common Failure Symptoms:

• Temperature readings become inconsistent.
• Equipment temperature control responds abnormally to sensed conditions.
• Temperature indication does not correspond normally with operating conditions.
• The probe or its associated components show visible physical damage.
• Temperature monitoring becomes intermittent.

Equipment Compatibility:
Verify that PITCO part number B6700604-CL matches the equipment documentation before purchasing. Confirm the applicable fryer configuration, temperature probe specifications, and manufacturer parts information. The kit is associated with Pitco SG Series fryers.

Technical Specifications:
Brand: Pitco
Part Number: B6700604-CL
Component Name: Temperature Probe Service Kit
Application: Fryer

Step1: Turn off the fryer and allow the oil to cool completely.

Step2: Disconnect electrical power and shut off the gas supply.

Step3: Drain oil below the probe level if necessary.

Step4: Remove the stuffing box fitting and disconnect the probe leads.

Step5: Install a new probe, secure the stuffing box, and reconnect wiring.

Step6: Refill oil, restore power, and test temperature operation.

• Can I replace the Pitco probe myself, or should I hire a professional?

  The replacement can be carried out by a skilled technician or individuals with basic DIY knowledge. The kit is designed to be user-friendly and comes with detailed instructions to guide you through the process.

• When should I consider replacing my old Pitco probe?

  If you're experiencing temperature inconsistencies, inaccurate readings, or operational issues with your fryer, it might be time to consider replacing the probe. 

• What maintenance is required for the Pitco B6700604-CL Temperature Probe?

  Regularly inspect the probe, wire leads, and stuffing box for corrosion, damage, or loose connections. Clean the probe with a soft cloth and mild detergent, avoiding abrasive materials. Periodically check calibration to ensure accurate temperature readings and disconnect power before servicing.

• What are the common issues with the Pitco B6700604-CL Temperature Probe?

  • Probe fails to register temperature consistently
  • Slow response to temperature changes
  • Erratic readings due to cable interference
  • Sensor not calibrating correctly.

• What is the function of the Pitco B6700604-CL Temperature Probe Service Kit?

  It senses cooking oil temperature and provides temperature feedback to the fryer control system during heating operation.

• What can cause inaccurate temperature readings from a fryer probe?

  Sensor wear, physical damage, residue buildup, wiring issues, or improper probe positioning can affect temperature feedback.

• Can oil residue affect temperature probe performance?

  Yes. Excessive residue or buildup around the sensing area can interfere with accurate temperature detection.

• How can a faulty temperature probe affect fryer operation?

  Incorrect temperature feedback can cause irregular heating, inaccurate temperature readings, or difficulty maintaining the selected cooking temperature.

• What should be checked when the fryer temperature fluctuates unexpectedly?

  The temperature probe, its connections, mounting position, and related temperature-control components should be inspected for possible issues.

• Commercial Blender Buying Guide: Types, Uses, Features & Benefits May 21, 2025
• Ghost Kitchens: Commercial Restaurant Food Delivery Simplified Oct 02, 2024
• Innovative Staff Empowerment: The Key to Dynamic Kitchen Management Sep 04, 2024