ROYAL RANGE 1724 Fryer Door Magnet

Provides magnetic retention for the fryer door. The Royal Range 1724 Fryer Door Magnet generates magnetic holding force to keep the door positioned against the cabinet when closed. The magnet functions as a mechanical retention component, allowing the door to remain closed while permitting access when opened.

Equipment Compatibility:
Designed for use with commercial fryer equipment from APW, American Range, Anets, Dean, Frymaster, Garland, Imperial, and Pitco where a fryer door magnet is required.

Product Specifications:
SKU: 1724
Manufacturer: Royal Range
Product Type: Fryer Door Magnet

Key Features:

• Provides magnetic holding force for fryer door retention.
• Maintains the door in the closed position.
• Functions as a mechanical retention component.
• Supports secure positioning of the fryer door.

Step1: Disconnect power or shut down the equipment before servicing the door assembly.

Step2: Open the door and remove the worn magnet from the mounting location.

Step3: Clean the mounting surface thoroughly to remove grease, residue, or loose debris.

Step4: Position the new door magnet in the original alignment and secure it with the correct hardware.

Step5: Close the door slowly to verify proper magnetic contact and door closure.

Step6: Test door operation to ensure consistent sealing and secure holding strength.

• What maintenance is required for the ROYAL RANGE 1724 Door Magnet?

  Clean the magnet and contact surface regularly to remove dust. Check alignment and tighten loose screws. Avoid moisture to prevent corrosion and ensure smooth door closing. Inspect magnet strength periodically for proper sealing.

• What are common issues with the ROYAL RANGE 1724 Door Magnet?

  • Weak magnetic hold due to wear or misalignment.
  • Door not closing properly causing gaps.
  • Magnet detachment from surface or loose fitting.
  • Reduced performance in dusty or humid conditions.
  • Noise or clicking during door closure.