Garland G01919-01 Oven TS Safety Valve W/ Magnet Head, 1/4" CCT

SKU: G01919-01 1-G01919-01 Brand:
Garland
Availability:
In Stock
(0)
$146.53 Price reduced from $310.44
Save $163.91
Have a Question? +1 (866) 863-0907

Specifications:

  • Ts Safety, Magnet Head And Gas Carrier, J Type
  • Gas In/Out 1/2" Fpt, Pilot In/Out 1/4" Cct
  • For Head Only Use H207, G-115, # 51+1106
  • Franklin Chef Oven Series: Gh.
  • Garland Oven Mco-G-5.
  • Series: Bco, Eco, G48P, G2000, Ico, Tg3/4, Ttg3/4.
  • Southbend Oven 1364D-40, 1364C, 1364D.
  • Series: Old 300 Standard Oven With F Suffix~
  • New 300 & 400 Standard & Convection Ovens With Or Without
  • "X" Prefix
  • Vulcan Hart Model?

Description

The Garland G01919-01 1/4” TS Safety Valve with Magnet Head is an essential safety device used in commercial gas cooking appliances. Thereby, this valve controls the release of the gas constantly to enhance safe utilization by preventing leakage when the appliance is turned off. It uses a J-type magnet head to open the valve so that gas can only circulate when there is need, unlike its fixed counterpart, making this type of burner safer and more efficient than its fixed burner counterpart. The advantages are enhanced operating dependability and decreased probability of danger from gas in the kitchen.

Dimensions:

  • Weight: 0.5 lbs
  • Length: 3 in
  • Height: 3.5 in
  • Width: 1.5 in

GARLAND:

1027001 227120 CK1027001 GL1027001

HOBART:

005924 15924 805924

JADE RANGE:

460-130-000

SOUTHBEND:

10184 1164037 SOU1164037

U-LINE:

1720-007 1720-00G

VULCAN HART:

005924 15924 805924

Step1: Turn off gas supply and disconnect power to the oven.

Step2: Allow the unit to cool completely before starting.

Step3: Remove access panel and locate the existing safety valve.

Step4: Disconnect gas line and wiring carefully.

Step5: Install new valve, securing fittings tightly.

Step6: Reconnect wiring and gas line.

Step7: Restore gas and power, then test for leaks and proper operation.

  • What maintenance is required for the Garland G01919-01 Safety Valve With Magnet Head?

    Inspect the safety valve regularly for gas leaks, corrosion, and proper magnet connection. Ensure clean electrical and thermocouple connections to maintain stable millivolt operation. Remove grease buildup around the valve body and verify smooth opening and closing response during routine oven service checks.

  • What are common issues with the Garland G01919-01 Safety Valve With Magnet Head?

    • Magnet head failure causing intermittent gas cutoff.
    • Valve sticking or delayed response during ignition.
    • Gas flow inconsistency due to debris or wear.
    • Seal leakage leading to poor oven heating efficiency.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More