Henny Penny 96887 Fryer High-Limit Thermocouple Service Pack LVE20X

Step1: Disconnect electrical power and allow fryer oil and components to cool completely.

Step2: Drain oil if required to safely access the hi-limit sensing area.

Step3: Remove fryer panels to locate the existing thermocouple and hi-limit assembly.

Step4: Carefully disconnect thermocouple leads from the control or safety module.

Step5: Remove the old thermocouple and inspect mounting point for damage or residue.

Step6: Install the new thermocouple from the service pack in the same position and secure firmly.

Step7: Route wiring away from heat sources and reconnect to correct terminals.

Step8: Restore power, heat fryer gradually, and verify proper high-limit cutoff operation.

• What maintenance is required for the Henny Penny 96887 Thermocouple Service Pack?

  Regularly inspect and clean the thermocouple and hi-limit sensor to prevent grease buildup and false readings. Proper maintenance ensures accurate temperature control and safe fryer operation. Always disconnect power before servicing to ensure safety.

• What are common issues with the Henny Penny 96887 Thermocouple Service Pack?

  • Inaccurate temperature readings.
  • Hi-limit switch tripping and shutting down the fryer unexpectedly.
  • Thermocouple sensor degradation or delayed response.
  • Corroded connectors leading to signal loss.
  • False overheating alarms triggering safety shutdowns.