Cres Cor 0519087K Hinge Kit
Description
Dimensions:
- Weight: 0.3 lbs
This Part Fits the Following Models
91 modelsHinge Operation:
Supports controlled opening and closing by allowing the door to rotate around the hinge pivot points. The hinge assembly accommodates repeated movement while helping maintain the intended relationship between the door and cabinet. Proper hinge operation helps reduce unwanted movement and supports consistent door travel.
Pivot Movement:
Provides the mechanical pivot required for door rotation. The hinge components guide the door through its opening and closing path while transferring movement forces through the hinge assembly. Smooth pivot action helps reduce binding and irregular door movement during repeated use.
Replacement Guidelines:
Replacement of the Door Hinge Kit if the hinge is cracked, bent, deformed, worn, loose, or no longer supports proper door movement and alignment. The part number 0519087K and door hinge kit configuration should be verified before replacement to ensure the correct hinge kit is selected. Replace the hinge kit if deterioration affects door support, alignment, movement, closing, or normal equipment operation.
Common Signs of Wear:
- Uneven or restricted door movement.
- Excessive movement around the pivot area.
- Loose hinge mounting points.
- Visible wear or deformation.
- Door movement that becomes difficult or inconsistent.
Equipment Compatibility:
The Cres Cor 0519087K Door Hinge Kit is intended for equipment applications requiring this specific hinge configuration. Verify the equipment model, manufacturer part number, mounting arrangement, and hinge specifications before purchase.
Technical Specifications:
Brand: Cres Cor
Part Number: 0519087K
Product Name: Door Hinge Kit
CRES COR:
0519 087 K 0519-087-K
Step1: Ensure the appliance door is supported and power is off to prevent injury.
Step2: Remove the old hinge components by unscrewing all mounting hardware.
Step3: Align the new hinge kit parts in the correct positions on the door and frame.
Step4: Secure each component tightly with the provided screws.
Step5: Check door alignment and smooth operation before full use.
Step6: Wear gloves to protect hands from sharp edges.
-
What is the purpose of hinges in commercial ovens?
Hinges in commercial ovens allow the oven doors to open and close smoothly, maintaining a tight seal for efficient cooking and heat retention.
-
How often should oven hinges be replaced?
Oven hinges should typically be replaced when you notice issues with the door not closing properly or if there is visible wear and tear, which can vary depending on usage but is usually every 1-3 years.
-
What maintenance is required for the Cres Cor 0519087K Hinge Kit?
Check the hinges regularly for wear, rust, or loosened screws. Lubricate pivot points with a food-safe lubricant and clean any debris to ensure smooth door movement. Tighten screws as needed for proper alignment.
-
What are common issues with the Cres Cor 0519087K Hinge Kit?
- Door sagging or misalignment
- Squeaky or stiff operation
- Loose or stripped mounting screws
- Rust or corrosion affecting movement
-
What does the Cres Cor 0519087K Door Hinge Kit do?
It provides the pivot connection between the door and cabinet structure, allowing controlled opening and closing during normal equipment operation.
-
How can worn hinge components affect door operation?
Worn components can cause restricted movement, excessive play, uneven door travel, or inconsistent opening and closing.
-
Can repeated door cycles cause hinge wear?
Yes. Frequent opening and closing subjects hinge components and pivot areas to repeated mechanical loads that can contribute to gradual wear.
-
What can cause a door hinge to become loose?
Repeated mechanical movement, worn mounting hardware, structural stress, or deterioration around the hinge area can contribute to looseness.
-
What are common signs of a damaged door hinge?
Common signs include difficult door movement, unusual play, visible deformation, loose mounting points, and inconsistent door operation.
Customer Reviews
Write a Review
-
Accurate Fit
Replaced hinge fast, door now moves without sticking issues.
-
Fits Well
Perfectly fits, great build quality
-
Perfect fit and smooth operation
Installed the Hinge Kit without any problems. It works perfectly and has restored my appliance's performance. Worth every penny!
-
High Quality
Sturdy and dependable, highly recommend
-
No waiting
I needed a Cres Cor Door Hinge Kit urgently, and they had it in stock. No hassle, no waiting - just what I needed.
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More
