Vulcan Hart 00-404079-0000F Burner Orifice Holder 90° Elbow
$40.15
In stock
SKU
00-404079-0000F
Manufacturer:
Vulcan Hart 00-404079-0000F Burner Orifice Holder 90 Degree Elbow is used to direct the flow of gas in the supply line to the burner by holding the orifice at a fixed angle to provide correct alignment. It is directly linked to the burner assembly where gas is passed through the orifice to the combustion area. This installed at the cross over point of the gas line and the burner at 90 degrees to ensure that the orifice is in the right position to deliver the flame during operation.
Dimensions
- Length: 2 In
- Width: 1.5 In
- Height: 2 In
- Weight: 0.2 lbs
Product Notes
- Burner Orifice Holder, 7/16" Cct X Orifice Thread 3/8"-27,
- With Nut- Does Not Include Orifice
- Nat # 44 Orifice A2441-44, Q-448, # 26-1104
- Lp # 56 Orifice A1619, Q-400, # 26-1780
- Vulcan 12 Open Top, 148L, 148Lc, 160L, 160L77R, 160Lc, 24
- Griddle, 24L, 260L, 260Lc, 260Lcc, 36 Griddle, 36Fl77R,
- 36L,36L77R, 36Lc, 481L, 481Lc, 48L, 60Fl77R, 60L, 60L77R,
- 60Lc,60Lcc, Cmr34, Eg160, Eg24, Eg260, Eg36, Eg60, G260,
- G260C,G260Cc, G36, G36C, G48, G48C, G60, G60C, G60Cc,
- G60Lc,Gh45,Gh45/72, Gh60/45, Gh6045C, Gh60T/45, Gh6T45C,
- Gh72/45,Ghm45, Ghm45/72, Ghm60/45, Ghm60T/45, Ghm72/45,
- Ghx45,Ghxm45, Mg12, Sar34, Vst4B