Pitco A6674902 Gas Fryer Retaining Bag Clip Filter

Step1: Turn off the fryer, allow the oil to cool, and disconnect power before servicing.

Step2: Remove the filter pan and access the filter bag or filter envelope assembly.

Step3: Inspect the existing retainer clip and remove it if damaged or worn.

Step4: Position the new retainer bag clip over the filter bag edge to secure it firmly in place.

Step5: Ensure the filter media is properly seated and free of folds or obstructions.

Step6: Reinstall the filter pan and verify the clip holds the filter bag securely.

Step7: Restore power and run a filter cycle to confirm proper oil filtration and bag retention.

• What maintenance is required for the Pitco A6674902 Filter Retaining Bag Clip?

  Inspect the clip regularly for bending, loosening, or loss of tension that may affect secure filter bag holding. Clean grease buildup to ensure smooth operation and proper fit. Check alignment with the fryer filter assembly during routine servicing.

• What are common issues with the Pitco A6674902 Filter Retaining Bag Clip?

  • Loss of tension causing poor grip on filter bag.
  • Grease buildup affecting movement or fit.
  • Bent or deformed clip structure.
  • Improper alignment with filter assembly.
  • Slippage of filter bag during operation.