Hoshizaki 1A0260-01 Modular Crescent Cuber Spray Tube Right

A water distribution tube used in ice machines to direct water flow across the evaporator during ice production. This right-side spray tube helps deliver a controlled and even water stream over the freezing surface, supporting proper ice formation. It works as part of the internal water circulation system to maintain consistent coverage during the freeze cycle. In commercial ice machines, spray tubes are used to ensure uniform water distribution across the evaporator plate or grid. This helps form consistent ice shapes and prevents uneven freezing. If the tube becomes clogged, cracked, or misaligned, water flow can be restricted or uneven, leading to poor ice quality or reduced production. Replacing a damaged spray tube helps restore proper water flow, improve ice consistency, and support stable machine operation.

Equipment Compatibility:
Used across Hoshizaki modular crescent cuber ice machines, including cube ice makers and production units. This Spray Tube Right # 1A0260-01 is compatible with commercial equipment from leading brands such as Hoshizaki and more, where controlled water distribution and consistent ice formation are required for reliable operation.

Brand Compatibility:
This product replaces multiple part numbers used across compatible equipment models from brands such as Hoshizaki. Use the separate cross-reference data to confirm compatibility and ensure accurate ordering.

Product Specifications:
SKU: 1A0260-01
Manufacturer: Hoshizaki
Product Type: Spray Tube (Right)

Key Features:

• Directs water flow across the evaporator surface for ice formation
• Supports even water distribution during freeze cycle
• Helps maintain consistent ice size and shape
• Integrates into the internal water circulation system
• Reduces issues caused by clogged or damaged tubes
• Replacement restores proper flow and improves ice production

Replacing the clogged spray tube restored even water distribution across the evaporator.

Step1: Power off and disconnect water/ice machine before servicing. Remove right-side panel for access.

Step2: Detach old spray tube by loosening fittings and noting orientation.

Step3: Align new spray tube right into manifold, ensure seals seated properly.

Step4: Tighten fittings securely, avoid overtightening firmly.

Step5: Restore power and run cycle, check leaks and spray pattern.

Step6: Inspect alignment after first cycle and re-tighten if needed.

• What maintenance is required for the Hoshizaki 1A0260-01 Spray Tube?

  Regularly clean the spray tube to prevent mineral scale and food debris buildup that can block water flow. Inspect nozzles for clogging and ensure proper alignment during servicing. Use proper sanitizing solution and check fittings for leaks.

• What are common issues with the Hoshizaki 1A0260-01 Spray Tube?

  • Nozzle clogging from mineral buildup reducing spray pattern efficiency.
  • Uneven water distribution causing inconsistent ice or wash performance.
  • Leakage at fittings or loose connections.
  • Reduced flow due to scale accumulation in tube channels.