Kold Draft 102138001 Cam Arm Switch

Special Price $66.00 Regular Price $85.70
In stock
SKU
102138001
The Kold Draft 102138001 Cam Arm Switch is an electrical signal controller that reacts to contact or movement of water on its sensing surface and in response, changes the switching circuit it is connected to. Once water gets to the plate, it changes the conductive state that enables or disables the corresponding control operation. It is mounted at the prescribed water contact or sensing point within compatible ice machines where the presence of water has to be observed. This correct system reaction is reached by communicating directly with the water flow or level detection units of the unit.

Dimensions

  • Length: 3 In
  • Width: 2 In
  • Height: 2 In
  • Weight: 0.02 lbs
https://partsfe.com/media/catalog/product/k/o/kold-draft-102138001-switch-95728-2.jpg

Product Notes

  • .1A/125Vac, (3) 3/16" Tab Term
KOLD DRAFT:
Write Your Own Review
You're reviewing:Kold Draft 102138001 Cam Arm Switch
Your Rating
Customer Questions
What maintenance is required for the Kold Draft 102138001 Switch?

Inspect the switch regularly for loose terminals or debris. Ensure the contacts are clean and wiring is secure. Disconnect power before servicing, and test the switch periodically for accurate operation.

What are common issues with the Kold Draft 102138001 Switch?

  • Switch fails to complete the circuit.
  • Loose or corroded terminals.
  • Mechanical sticking of the switch.
  • Intermittent operation under load.

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More

Installation Steps

Step1: Turn off and unplug the appliance.

Step2: Remove the access panel to reach the existing switch.

Step3: Disconnect wires from the old switch terminals.

Step4: Install the new switch in the same position and reconnect wires correctly.

Step5: Secure the panel and restore power.

Step6: Test the switch to ensure proper operation.