Southbend 1181996 Oven Temperature Probe
Description
Dimensions:
- Weight: 0.24 lbs
Temperature Monitoring:
The probe continuously senses temperature changes within the oven cavity and provides corresponding feedback to the control system. This ongoing measurement allows the controller to recognize increases or decreases in oven temperature during normal operation.
Sensor Response:
The probe responds to changes in the oven's thermal environment and converts those changes into a signal recognized by the control system. Consistent sensor response is important for accurate temperature monitoring and proper control-system operation.
Replacement Guidelines:
Replace the Southbend 1181996 Oven Temperature Probe if it is damaged, produces inaccurate temperature readings, responds inconsistently, or no longer provides reliable temperature feedback. The part number 1181996 and complete oven model should be verified before replacement to ensure the correct temperature probe is selected. Replace the probe if deterioration affects temperature sensing, signal response, temperature regulation, or normal oven operation.
Common Failure Symptoms:
- Inaccurate oven temperature readings.
- Temperature fluctuations during operation.
- Oven overheating or underheating.
- Longer or inconsistent preheat times.
- Uneven cooking or baking results.
- Temperature-related error codes.
Equipment Compatibility:
The Southbend 1181996 Temperature Probe KAN-BAN is intended for select commercial oven applications. Compatibility may vary by oven configuration, including convection, gas, electric, and combination equipment. Verify the complete equipment model and part number against applicable Southbend documentation.
Technical Specifications:
Part Number: 1181996
Brand: Southbend
Component Type: Temperature Probe
Equipment Type: Commercial Oven
Manufacturer/Series: KAN-BAN
SOUTHBEND:
Step1: Turn off the oven and disconnect electrical power.
Step2: Remove the control panel or access cover to reach the existing probe.
Step3: Carefully disconnect the wiring from the old temperature probe.
Step4: Install the new probe in the same location and secure it properly.
Step5: Reconnect the wiring, ensuring tight and correct connections.
Step6: Reassemble the control panel, restore power, and test oven temperature accuracy.
-
Can I use a Southbend Range Temperature Probe with different Southbend equipment?
Temperature Probes are designed for specific Southbend commercial cooking equipment models. It's important to verify compatibility with your equipment before purchasing or using the probe.
-
Can I replace a Southbend Temperature Probe on my own?
Replacing a Range Temperature Probe might require technical expertise, especially when dealing with electrical connections. Some models may be user-replaceable, but it's advisable to consult the product manual or hire a professional technician.
-
How do I dispose of a faulty Probe?
Disposing of a faulty Probe should follow proper electronic waste disposal guidelines. Contact local waste disposal authorities or recycling centers for instructions on how to safely dispose of electronic components.
-
What maintenance is required for the Southbend 1181996 Temperature Probe?
Inspect the probe regularly for damage, corrosion, or loose wiring that may affect temperature accuracy. Clean the probe gently to remove grease buildup that can interfere with sensing performance. Ensure secure mounting and proper placement inside the oven for accurate readings. Always disconnect the power and allow the oven to cool before servicing for safety.
-
What are the common issues with the Southbend 1181996 Temperature Probe?
- Inaccurate temperature readings.
- Probe failing to register in the oven display.
- Bent or damaged probe tip.
- Loose or corroded connector affecting the signal.
-
What is the Southbend 1181996 temperature probe used for?
The Southbend 1181996 measures oven temperature and provides feedback to the control system for heating regulation.
-
How does the 1181996 temperature probe support oven temperature control?
It senses temperature changes and sends feedback to the controller, allowing heating operation to be adjusted according to current oven conditions.
-
What are common signs of a faulty oven temperature probe?
Common signs include inaccurate temperature readings, overheating, underheating, temperature fluctuations, extended preheating, error codes, or inconsistent cooking results.
-
Does the temperature probe monitor the oven during cooking?
Yes. The probe provides ongoing temperature feedback during applicable heating and cooking cycles.
-
Is the Southbend 1181996 a heating element?
No. The 1181996 is a temperature-sensing component that provides feedback to the oven control system rather than generating heat.
Customer Reviews
Write a Review
-
Accurate Feedback
Temperature adjustments now reflect properly on the control screen.
-
Compact Probe
High-quality part, quick installation
-
Robust and Dependable
This probe is ideal for taking fast and consistent temperature readings. It produces perfect outcomes every time you use it.
-
Stable Performance
Very reliable, easy to use and accurate
-
Loved it
The SouthBend range probe ensures that my meals are cooked to perfection, resulting in mouthwatering dishes that impress every time.
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More
