Blodgett 33294 Burner Assembly 30.75" X 6.25" Set

Heat Distribution:
Supports the distribution of heat within the designated heating area of the equipment. The burner arrangement provides the heat source, while its configuration helps position the generated heat across the applicable heating space. This allows the burner assembly to contribute to the equipment's overall heat-distribution arrangement without addressing the combustion process itself.

Combustion Process:
Forms part of the combustion-based heating system by providing the designated burner arrangement where fuel is converted into heat. The burner assembly works within the combustion area to establish the heat source required by the equipment's heating system. Its position and configuration allow the combustion-generated heat to be introduced into the designated heating space while remaining distinct from the equipment's separate heat-distribution components.

Replacement Guidelines:
Replace the Blodgett 33294 Burner Assembly when physical damage, corrosion, deformation, or deterioration affects its intended combustion or heat-generating function. Inspect the burner assembly and related burner-system areas for conditions that could affect flame distribution or oven operation. Replace the component when it can no longer maintain its intended function within the oven heating system.

Common Failure Symptoms:

• Uneven or irregular burner flame.
• Delayed or inconsistent burner ignition.
• Visible corrosion or damaged burner ports.
• Hot and cold spots inside the oven cavity.
• Incomplete or unstable combustion.
• Burner flame lifting or flashing back.

Equipment Compatibility:
The Blodgett 33294 Pizza Oven Burner Assembly is designed for compatible Blodgett commercial pizza ovens. Verify the equipment model number, part number, and specifications before purchase to ensure the correct application.

Technical Specifications:
Manufacturer: Blodgett
Part Number: 33294
Product Name: Burner Assembly
Length: 30.75"
Width: 6.25"

Step1: Turn off the appliance to prevent burns or electrical hazards.

Step2: Remove the oven grates and any existing burner components.

Step3: Disconnect gas supply and carefully remove the old burner assembly.

Step4: Position the new burner assembly and secure it with mounting screws.

Step5: Reconnect the gas supply and check for leaks using a soap solution.

Step6: Reinstall grates, restore power, and test burner ignition and flame.

• How often should I replace the Burner Assembly Kit to maintain optimal burner performance, and are there signs that indicate it's time for a replacement?

  The replacement interval depends on usage and wear. Signs that it's time for replacement include uneven heating, poor flame control, or visible wear and tear.

• Do Burner Assembly Kits include components for both natural gas and propane use or do I need to specify my gas type when purchasing?

  Burner Assembly Kits are typically specific to either natural gas or propane. When purchasing, ensure you select the kit compatible with your gas type.

• Can a Burner Assembly Kit improve the safety of my gas stove, and are there specific safety features to look for in a kit?

  While the kit itself may not drastically change the overall safety of the stove, some kits include safety features like flame sensors or thermocouples to enhance burner safety.

• What maintenance is required for the Blodgett 33294 Burner Assembly Set?

  Inspect the burner assembly regularly for debris, grease, or rust buildup. Clean with a soft brush and mild detergent, ensuring all ports are clear. Check gas connections for leaks and tighten as needed. Always turn off the gas supply before maintenance.

• What are the common issues with the Blodgett 33294 Burner Assembly Set?

  • Uneven flame distribution
  • Burner not igniting
  • Clogging of burner ports
  • Gas leaks from loose connections.

• What maintenance is required for the Blodgett 33294 Burner Assembly?

  Verify that burner ports are clear and unobstructed to allow proper gas flow. Tighten mounting brackets if loose and ensure flame spreaders are positioned correctly. Confirm ignition sparks evenly across all burners. Always wear heat-resistant gloves when adjusting hot components.

• What are common issues with the Blodgett 33294 Burner Assembly?

  • Uneven flame across burners.
  • Ignition failure or delayed lighting.
  • Gas leakage from fittings.
  • Burner misalignment affecting heating.

• What is the Blodgett 33294 pizza oven burner assembly used for?

  The Blodgett 33294 is used as the burner assembly in a compatible pizza oven, providing the heat source required for cooking.

• What does the "Set" designation mean for the Blodgett 33294?

  The "Set" designation identifies the product as a grouped burner assembly intended to be used as a complete set rather than as an individual burner component.

• Why is the Blodgett 33294 specifically identified as a pizza oven burner assembly?

  This designation identifies its intended equipment application and distinguishes it from burner assemblies designed for other types of commercial cooking equipment.

• What should buyers verify before selecting the Blodgett 33294?

  Buyers should verify the specific pizza oven application and burner assembly configuration against their equipment parts information before selecting the component.

• Does the Blodgett 33294 burner assembly require regular maintenance?

  The available product information does not specify a regular maintenance procedure, so buyers should follow the maintenance requirements provided for the compatible pizza oven

• The International Restaurant and Foodservice Show of New York Jan 23, 2024