Southbend 1178341 Range Mechanical Timer

Step1: Disconnect electrical power to the range before starting installation.

Step2: Remove the control panel cover to access the existing mechanical timer assembly.

Step3: Label and disconnect all timer wires carefully to ensure correct reconnection.

Step4: Remove mounting screws and pull the old timer from the control panel opening.

Step5: Install the new mechanical timer in the same position and secure it firmly.

Step6: Reconnect wiring terminals, restore power, and test timer operation.

• What maintenance is required for the Southbend 1178341 Mechanical Timer?

  Keep the range mechanical timer clean and free of grease buildup, regularly wiping the knob and dial. Inspect internal gears and contacts for wear or sticking, ensuring smooth operation. Periodically verify timing accuracy and tighten electrical connections to prevent faults.

• What are common issues with the Southbend 1178341 Mechanical Timer?

  • Timer not advancing or stopping mid-cycle.
  • Inaccurate timing due to worn mechanical gears.
  • Sticky or hard-to-turn dial mechanism range.
  • Electrical contact failure causing intermittent operation.
  • Timer motor failure.
  • Knob slipping.
  • Calibration drift over time.