Toggle Nav
Search
Toggle Nav
main product photo

Server Products 82016 Spring 3/8" DIA X 7" L

Rating:
5 5 1
1  Review Add Your Review
$2.78
In stock
SKU
82016
Add to Wish List
Electrical & Hardware, Springs,
Manufacturer:
The Server Products 82016 Spring 3/8" DIA X 7" L is used to provide controlled compression within mechanical assembly by expanding and contracting during movement cycle‌.‍ The coiled structure stores mechanical energy when compressed, and releases it as the force is reduced allowing co‌nnected‍ components to return to their original position during repeated operation. Its design supports linear motion control while maintaining spacing and pressure b‍etween adjoining parts inside the assembly. It is installed in compatible commercial food dispensing equipment positioned within pump or actuator mechanisms where spring-loaded moveme‍nt‌ is required for dispensing or pressure-regulating function during service operation.

Dimensions

  • Length: 7 In
  • Width: 0.325 In
  • Height: 7 In
  • Weight: 0.1 lbs
https://partsfe.com/media/catalog/product/s/e/server-products-82016-spring-3-8-x-7-32108-2.jpg

Product Notes

  • Spring, 3/8" X 7"
  • Server Condiment Pump Old Style Pumps: Big Cheese,
  • Cp-(1/6,1/4,1/3,5, 6-1/2,8-1/2,10,10-1/2,200), Cream, Fsp,
  • Lbs, Lfsp, Lhssw, Lncs, mms, Sp, Sp-8-1/2.
  • New Style Pumps: Cp-(1/6,1/4,1/3,5,6-1/2,8-1/2,10,
  • 10-1/2,200), Cp-G(89Mm,110Mm,120Mm), Cpss-(L,R),
  • Csm, Fsp, Lbs, Lfsp, Lhssw, Lncs, mms, Sp, Sp-8-1/2.

A mechanical tension component used inside commercial condiment dispensing pumps, this compression spring helps control the pump’s return and dispensing action. Measuring 3/8" in diameter and 7" in length, it provides the necessary resistance to ensure smooth and consistent product flow when the pump handle is pressed and released. It supports proper mechanical balance inside both old-style and new-style Server condiment pump assemblies operating in food service environments. Working as part of the pump’s internal mechanism, the spring helps maintain controlled dispensing pressure so sauces, dressings, and condiments are delivered in accurate portions. When the spring becomes worn or loses tension, the pump may feel loose, stick during operation, or dispense uneven amounts. Replacing it helps restore proper pump response and improves serving consistency. It is commonly used in restaurants, cafeterias, and commercial food stations where reliable condiment dispensing is required for fast and efficient service.

Equipment Compatibility:
For commercial condiment pump systems using Server Products Condiment Pump Spring, include sauce dispensers and food topping pumps. This Condiment Pump Spring 82016 works with many Server Products pump systems, where strong and steady pump movement is needed for smooth condiment dispensing.

Brand Compatibility:
This part replaces several older spring part numbers used in many Server Products and more. A full list of matching numbers is available separately for correct replacement.

Product Specifications:
Product Type: Condiment Pump Spring
Manufacturer: Server Products
SKU: 82016
Size: 3/8" x 7"

Key Features:

  • 3/8" x 7" size provides proper tension and fits inside condiment pumps.
  • Ensures smooth pump return after each dispensing cycle.
  • Maintains consistent dispensing pressure for accurate portions.
  • Supports reliable sauce and condiment flow in service use.
  • Helps prevent sticking or uneven pump movement.
  • Restores proper mechanical balance in pump assemblies.
  • Compatible with Server Products condiment pump systems.

Operational Feedback:

“Fryer heating performance became consistent and even after installation of the correct conversion kit.”

Replaces Parts
SERVER PRODUCTS:
-82016, 82016, SER82016
Reviews 1
Write Your Own Review
You're reviewing:Server Products 82016 Spring 3/8" DIA X 7" L
Your Rating
FAQS
Customer Questions
What maintenance is required for the Server Products 82016 Spring?

Clean and inspect the spring regularly for buildup or corrosion, especially in food-service conditions. Lubricate lightly if applicable to reduce wear and ensure smooth operation. Replace if deformation or loss of tension is observed to prevent equipment malfunction.

What are the common issues with the Server Products 82016 Spring?

  • Corrosion from moisture or cleaning chemicals.
  • Loss of tension over time.
  • Binding or sticking during operation.
  • Misalignment causing inconsistent performance.
  • Deformation or bending under load.

Shipping

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

Returns

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

Payment Methods

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More

Installation Steps

Step1: Disconnect the system, release pressure and ensure unit is stable on the surface.

Step2: Remove housing cover and note spring orientation safely for correct reassembly.

Step3: Detach worn old spring from anchor points carefully, avoiding sudden recoil.

Step4: Install new spring onto hooks, ensuring correct alignment, tension, and secure seating.

Step5: Reassemble unit, check smooth plunger movement and ensure no binding.

Step6: Test dispensing function before returning to service; check consistent operation.