Bakers Pride 310123 Spark Ignition Lighter W/Palnut 23" Wire

$3.52
In stock
SKU
310123
The Bakers Pride 310123 Spark Ignition Lighter with Palnut and 23" wire is an ignition component that emits a spark to start gas burners in commercial cooking food service equipment. It is mounted close to the burner assembly and the wire leads from the piezo mechanism to the spark point enable the ignition to be controlled. This part of the system will start combustion in a safe manner and will support maintaining the correct functioning of the equipment in cooking or heating processes.

Dimensions

  • Length: 3.5 In
  • Width: 1 In
  • Height: 1 In
  • Weight: 0.2 lbs
https://partsfe.com/media/catalog/product/b/a/bakers-pride-310123-piezo-ignition-spark-lighter-w-palnut-23-wire-84926-2.jpg

Product Notes

  • Spark Lighter W/ Palnut, Piezo Ignition
  • 3-1/2" Long, Fits 3/4" Hole, Mount Has Built-In Ground.
  • For Black Electrode Wire Lead, 23" Wire 1/8" Round Female
  • Push-On X 1/8" Flat Female Push-On # 38-1333
  • For Orange Electrode Wire Lead, 20" Wire 1/8" Round Female
  • Push-On X 1/8" Flat Female Push-On # 38-1556
  • American Range
  • Anets Fryer Where Applicable
  • Griddle Scg24
  • Garland Fryer
  • Oven G284Rc, Stw286, Tg2A, Ttg2A.Series: H280.
  • Griddle Series: Gd,
  • Imperial Oven Series: Ihr & Ir W/Standard Oven.
  • Magikitchn Mkg(48,60,72)
AMERICAN RANGE:
10434, A10010, AMRA10010
BAKERS PRIDE:
GRINDMASTER:
410-00334
GROEN:
IMPERIAL:
1075, IMP1075
LOLO COMMERCIAL FOODSERVICE EQUIPMENT:
MAGIKITCH'N:
MONTAGUE:
RANDELL:
RANKIN DELUX:
ROYAL RANGE:
SOUTHBEND:
STAR MFG:
TRI-STAR:
U-LINE:
10-344
Write Your Own Review
You're reviewing:Bakers Pride 310123 Spark Ignition Lighter W/Palnut 23" Wire
Your Rating
Customer Questions
What maintenance is required for the Bakers Pride 310123 Piezo Ignition Spark Lighter Wire?

Clean electrode and wire regularly to remove grease and carbon buildup for consistent spark ignition. Check connections and tighten fittings periodically to prevent intermittent firing. Inspect insulation for wear and keep unit dry for safe operation.

What are common issues with the Bakers Pride 310123 Piezo Ignition Spark Lighter Wire?

  • Weak or no spark due to electrode fouling or misalignment.
  • Intermittent ignition from loose wire connections.
  • Wire insulation damage causing arcing or failure.
  • Palnut or mounting looseness affecting positioning.
  • Inconsistent spark strength under high moisture conditions.

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More

Installation Steps

Step1: Turn off gas supply and disconnect electrical power to ensure safety before servicing.

Step2: Remove old igniter and carefully note wiring and lead routing for correct replacement.

Step3: Mount new ignition spark lighter using palnut and secure it firmly in the designated bracket.

Step4: Connect wire lead to ignition electrode, ensuring a tight, secure fit.

Step5: Restore gas and power, then test ignition; check for spark and proper flame operation.